VDPL2201MHW10
HQ POWER
6
6. Use
MODE 1:
d001
is the default mode. Receive the DMX512 signal and set the desired address via the UP/DOWN
buttons.
Select channel between 1 and 245.
MODE 2: Press the MODE/ESC button until the displays shows
and select the desired function
via the UP/DOWN buttons.
is the master auto mode,
is the master sound mode control and
is the slave mode. Press the ENTER button to confirm the function;
will change to
,
will change to
and
will change to
.
MODE 3: Press the MODE/ESC button until the display shows
and select the desired function via the
UP/DOWN buttons.
is the pan mode and
is the invert pan mode. Press the ENTER button to
confirm the desired function. The display will indicate the “DMX” or “MASTER/SLAVE” mode that you
selected before.
MODE 4: Press the MODE/ESC button until the display shows
and set the desired function via
UP/DOWN buttons.
is the tilt mode and
is the invert tilt mode. Press the ENTER button to
confirm the desired function. The display will show the “DMX” or “MASTER/SLAVE” mode that you
selected before.
MODE 5: Press the MODE/ESC button until the display shows
and select the desired function via the
UP/DOWN buttons.
is the normal mode and
means the display is inverted. Press the ENTER
button to confirm the desired function. The display will indicate the “DMX” or “MASTER/SLAVE” mode that
you selected before.
MODE 6: Press the MODE/ESC button until the display shows
and select the desired function via the
UP/DOWN buttons.
is the power ON mode and
is the power OFF mode. Press the ENTER
button to confirm the desired function. The display will indicate the “DMX” or “MASTER/SLAVE” mode that
you selected before.
MODE 7: Press the MODE/ESC button until the display shows
. Press the ENTER button to reset the system.
MODE 8: Press the MODE/ESC button until the display shows
. Press the ENTER button to return to the default
mode.
7. Cleaning and Maintenance
1. All screws should be tightened and free of corrosion.
2. The housing, visible parts, mounting supports and the installation location (e.g. ceiling, suspension, trussing)
should not be deformed, modified or tampered with e.g. do not drill extra holes in mounting supports, do not
change the location of the connections.
3. Moving mechanic parts must not show any signs of wear and tear.
4. The electric power supply cables must not show any damage. Have a qualified technician maintain the device.
5. Disconnect the device from the mains prior to maintenance activities.
6. Wipe the device regularly with a moist, lint-free cloth. Do not use alcohol or solvents.
7. Contact your dealer for spare parts if necessary.
master mode => master auto mode
master mode => master sound control mode
slave mode => slave
Summary of Contents for VDPL2201MHW10
Page 2: ...VDPL2201MHW10 HQ POWER 2...
