VDP575SC8M2
HQPOWER
4
•
If extension cords are used make sure the core diameter is sufficient. All warnings concerning the power cord
apply to extension cords.
•
Make sure no liquid or any object can enter the housing or come in contact with the electric circuit, including the
power cord. Failure to do so may lead to malfunction, short-circuits or electroshocks.
•
Never leave a powered device unattended.
•
There may be some smoke or a particular smell when the device is activated for the first time. This is normal and
any smoke or smell will gradually disappear.
•
Do not look directly at the light source as sensitive people may go into epileptic seizure if they do.
•
Note that damage caused by user modifications to the device is not covered by the warranty.
•
Keep the device away from children and unauthorised users.
3. General Guidelines
•
This device is designed for professional use on stage, in discos, theatres, etc. The
VDP575SC8M2
should only be
used indoors and connected to an alternating current of max. 230VAC/50Hz.
•
Lighting effects are not designed for permanent operation: regular operation breaks will prolong their lives.
•
Do not shake the device. Avoid brute force when installing or operating the device.
•
Select a location where the device is protected against extreme heat (see “
Technical Specifications
”), dust and
moisture. Respect a minimum distance of 0.5m between the device’s light output and any illuminated surface.
•
Never operate the device where splashing or dripping water, rain, moisture or fog may harm the device. Install the
device 0.5m away from a smoke machine output nozzle.
•
Do not operate the device during thunderstorms.
•
Ensure sufficient ventilation by leaving 0.5m of free space between the device and any other object.
•
Use an appropriate safety cable to fix the device (e.g.
VDLSC7
or
VDLSC8
).
•
Familiarise yourself with the functions of the device before actually using it. Do not allow operation by unqualified
people. Any damage that may occur will most probably be due to unprofessional use of the device.
•
Use the original packaging if the device is to be transported.
•
All modifications of the device are forbidden for safety reasons. Never remove the barcode.
•
Only use the device for its intended purpose. All other uses may lead to short circuits, burns, electroshocks,
crash, etc. Using the device in an unauthorised way will void the warranty.
•
The installation has to be approved by an expert before the device is taken into service.
4. Description
1.
blackout input
2.
fuse holder
3.
power cord input
4.
ventilation slot
5.
DMX input
6.
DMX output
7.
LCD
8.
microphone
9.
control LEDs
10.
encoder
Summary of Contents for AERON 575 I
Page 2: ...VDP575SC8M2 HQPOWER 2...
