background image

Disclaimers

1. This product must be installed and used as per these instructions.

2. This product should be cleaned periodically only with a damp cloth. Cleaning agents and solvents should not be used.

3. This product is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and  knowledge, unless they 

have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be  supervised to ensure that they do not
play with the appliance.

4. This product is intended for household use and similar purposes. It is not suitable for use in and environment heavily laden with dust. Under these conditions  the life of the

fan motor can be significantly reduced.

5. This product should not be enclosed in thermal insulation as it may cause the unit to overheat.

6. This product has been designed to operate in ambient temperatures -10

°

C to 40

°

C.

7. This product contains no serviceable parts and no attempt should be made to repair it. If the product is faulty it should be discarded.

8. Airflows listed in this product indicate the product performance. Refer to the BCA(Building Codeof Australia), or similar, for the appropriate airflow required  for a 

particular installation.

9. Ventilation products must have an adequate source of external air to ensure correct performance.

10. Consideration must be taken in the installation of ducts to ensure that condensation that will form in the duct will not run back into the fan housing.

11. Precautions must be taken to avoid the back-flow of gases into the room from the open flue of gas or other fuel-burning appliances.

12. This product has been designed for domestic or similar uses and is not suitable for a commercial installation.

13. This product is not suitable for installation in hazardous and/or corrosive areas.

14. Thematerial in this product may varyin colour from batch to batch. Colour matching from one batch to another cannot be guaranteed.

15. Extended exposure to UV rays (such as exposure to direct sunlight) may cause discolouration of this product.

16. This product utilises intellectual property in the form of registered designs, trademarks, and/or patents. Such intellectual property remains the property of  Legrand in 

all cases.

17. Legrand reserves the right to modify the specification of this product at anytime.

LE

09

23

7A

A

C

06_

20

20

   

   

   

   

 

Warranty

Legrand warrants this product for a period of 3 years from the date of purchase. These
goods come with guarantees that cannot be excluded under the Australian and New 
Zealand Consumer Laws. You  are entitled to a replacement or a refund for a major 
failure and for compensation for any other reasonably foreseeable loss or damage. You
are also entitled to have the goods repaired ifthe goods fail to be acceptable quality and 
the failure does not amount to a major failure.

See the Warranty card enclosed with this product forfurther details.

Customer Service

For all Customer Service and Technical Support  please 
call Monday to Friday during business hours.

Legrand Australia  
1300 369 777
www.hpm.com.au

Legrand NewZealand 
0800 476 009
www.hpm.co.nz

ABN: 31 000 102 661

Summary of Contents for EFD01 Series






Reviews: