background image

SAFETY FEATURE: 

If there is a power failure, the timer is unplugged or the wall socket is switched off, the programs and mode setting that 

you have entered will be saved. When power is restored, if the timer was on and in “AUTO” mode, it will not resume the interrupted program 
and will not turn back on until the next programmed “ON” time. If in “OFF” mode, the timer will remain off. If in “ON” mode, the timer will 
turn back on.

LE09335ABA 

06/2016 

 

HPML0891

Warranty

HPM Legrand warrants this product for a period of 3 years from 
the date of purchase. 

These goods come with guarantees that cannot be excluded 
under the Australian and New Zealand Consumer Laws. You 
are entitled to a replacement or a refund for a major failure and 
for compensation for any other reasonably foreseeable loss or 
damage. You are also entitled to have the goods repaired if the 
goods fail to be acceptable quality and the failure does not amount 
to a major failure. 

See the Warranty card enclosed with this product for further 
details.

Customer Service

For all Customer Service and Technical Support  
please call Monday to Friday during business hours.

HPM Legrand Australia 
1300 369 777 
www.hpm.com.au

HPM Legrand New Zealand 
0800 476 009 
www.hpm.co.nz

ABN: 31 000 102 661

1.  This product contains no serviceable parts and no attempt should be made to repair this product. If the product is faulty it should be discarded. 
2. This product has been designed to operate in ambient temperatures: 0°C to 40°C.
3. This product should only be cleaned with a damp cloth. Cleaning agents and solvents should not be used.
4. This product has been designed for domestic or similar uses and is not suitable for a commercial installation.
5.  Electrical installations periodically receive transient over voltages. This product has been designed to minimise the effect of such voltages on 

connected equipment. It may not give full protection for extreme over-voltage transients such as those resulting from a close lighting strike.

6.  This product utilises intellectual property in the form of registered designs, trademarks, and/or patents. Such intellectual property 

remains the property of HPM Legrand in all cases.

7. Extended exposure to UV rays (such as exposure to direct sunlight) may cause discolouration of this product.
8. The material in this product may vary in colour from batch to batch. Colour matching from one batch to another cannot be guaranteed.
9. HPM Legrand reserves the right to modify the specification of this product at any time. 

12

Disclaimers

Summary of Contents for D817/2DP

Page 1: ...nd buttons to select the day of the week When correct press SET to confirm the selection The hour figure on the display will flash Step 3 Use and to select the correct hour Press SET to confirm your selection and the minutes figure will flash Step 4 Use the and to set the minutes Press SET to finish setting the time Step 5 The clock can be reset at any time by repeating steps 1 4 When setting the ...

Page 2: ...press once 1ON will appear in the bottom left corner Step 2 Press SET to enter programming mode The days of the week at the top of the LCD screen will flash Step 3 Press or to scroll through the day of the week setting options The day of the week setting options are listed below MO TU WE TH FR SA SUN this program will operate every day of the week MO TU WE TH FR SA this program will operate every ...

Page 3: ...e reset If the battery is flat it needs to be charged for at least 24 hours before it can be used It will take 3 4 days to reach full charge In sleep mode the minimum lifespan of the battery is 6 months In sleep mode the maximum lifespan of the battery is 15 months 11 Battery This feature allows you to set your appliances to stay on or off for a set time For example have a lamp remain off for 2 ho...

Page 4: ...7 www hpm com au HPM Legrand New Zealand 0800 476 009 www hpm co nz ABN 31 000 102 661 1 This product contains no serviceable parts and no attempt should be made to repair this product If the product is faulty it should be discarded 2 This product has been designed to operate in ambient temperatures 0 C to 40 C 3 This product should only be cleaned with a damp cloth Cleaning agents and solvents sh...

Reviews: