6
Deleting Programmes
Step 1:
To delete ALL pre-programmed settings, press the RESET button. The clock will need to be reset .
Step 2:
To delete an individual timer setting, re-programme the required block so the start and finish times are the same
OR
Scroll to the block you wish to delete and press the MODE button. The display will change to --:--. To retrieve the setting press the MODE
button again.
7
Using the Timer
Step 1:
To use the timer plug it into a power source and plug an appliance into the timer. Be sure to turn your appliance on.
Step 2:
Press the MODE button until the horizontal bar at the bottom of the LCD is above the AUTO label - the timer will now switch the
appliance on and off according to the programmed settings. The red LED indicates when there is power to the appliance.
Step 3:
You can override the timer settings:
a.
Press MODE until the horizontal bar is over the ON label to manually switch the appliance on.
b.
Press MODE until the horizontal bar is over the OFF label to manually switch the appliance off.
Please Note: If you use the MODE button to turn your appliance ON (or OFF) from AUTO mode, when you return to AUTO mode, the
appliance will remain ON (or OFF) until the next time it is programmed to switch OFF (or ON).
There are 14 different programme blocks that can be set.
Step 1:
To select the first block make sure the timer is displaying the current time and press once.
“1
ON
” will appear in the bottom left corner.
Step 2:
Press SET to enter programming mode. The days of the week at the top of the LCD screen will flash.
Step 3:
Press or to scroll through the day of the week setting options.
The day of the week setting options are listed below:
MO TU WE TH FR SA SUN .......(this program will operate every day of the week)
MO TU WE TH FR SA ...............(this program will operate every day except Sunday)
MO TU WE TH FR .....................(this program will operate on weekdays only)
TH FR SA ..................................(this program will operate on Thu, Fri & Sat only)
MO TU WE ................................(this program will operate on Mon, Tue & Wed only)
SA SU .......................................(this program will operate on Sat & Sun only)
TU TH SA ..................................(this program will operate on Tue, Thu & Sat only)
MO WE FR ................................(this program will operate on Mon, Wed & Fri only)
Once you are happy with your day/s selection, press SET to confirm. The hour figure will now flash.
Step 4:
Use or to select the time (hour) you want the program to start. Press SET to confirm the setting - the minutes figure will flash.
Step 5:
Press or to select the time (minutes) you want the program to start. Press SET to confirm.
Step 6:
If you want to revise the day or time set repeat steps 1 - 5.
Step 7:
When you are happy with the start time chosen, press once to scroll to the program finish time. “1
OFF
” will be displayed in the
bottom left corner.
Step 8:
Set the off day and time using the procedure in steps 2 - 5.
Step 9:
To set another programme block press to scroll to the next block. To finish programming press CLOCK to return to clock mode.
5
Setting the Timer
(the program will only operate
on the day selected)
MO
TU
WE
TH
FR
SA
SU
