17
Charging a Lithium battery
LiPo CHARGE
2.0A
11.1V(3S)
DEC INC
DEC INC
START
ENTER
BATT
STOP
CONFIRM (ENTER)
R: 3SER
S: 3SER
The value on the left on the second line is the current. After setting the
current and voltage, press START/ENTER key for 3 seconds or more to
start the process. (Current: 0.1-5.0A Voltage: 3.7-22.2v)
This display shows the number of cells detected by the charger and the
number set manually by the user. “R” is the chargers reading. “S” is the
user set value, set previously. If both numbers are the same you can
start charging by pressing the START/ENTER Key. If not press
BATT.TYPE/STOP key to go back and amend if needed.
This screen shows the real time status during the charge process. Press
BATT.TYPE/STOP key once to stop the charge process.
The “CHARGE” charging mode is for charging LiPo/Li-ion/LiFe battery without the balancing lead.
Charging a Lithium battery in charge mode
START
ENTER
LP3S
1.2A 12.59V
CHG
22:43
00682
Number
of cells
Charging
Current
Charging
Time
Charged
Capacity
Battery
Voltage
>3 Seconds
Summary of Contents for reactor 500
Page 1: ......
Page 134: ...2015 ...
