EXB1 Recumbent Exercise Bike
E&OE
© 2017 HPF/Proflex
9
If the pedal does not "feel right" when being screwed in, STOP immediately and check that it is the
correct pedal and that it is aligned properly with the crank arm.
Failure to follow the instructions
here or take due care may damage the equipment and void any product warranty
.
14. Starting with the right-hand pedal, identify the right-hand pedal (
24
), which is identified by
having a right-hand thread (this is the usual type – rotate right / clockwise to tighten) and an
"R" (
M
) on the end of the pedal bolt thread and on the underside of the pedal.
15. Very carefully begin screwing the pedal bolt into the crank arm (
N
) (rotate right / clockwise). If
the pedal bolt does not "feel right" when being screwed in, STOP immediately and check that it
is the correct pedal and that it is aligned properly with the crank arm. Firmly tighten (rotate
clockwise) the pedal bolt using the spanner.
16.
Repeat steps 14 to 15 for the left-hand pedal (has an "L" on the end of the pedal bolt
thread and on the underside of the pedal), noting that the pedal bolt and crank arm
thread is left-hand (rotate left / anti-clockwise to tighten)
.
24
M
N
25
