HPF PROFLEX EXB1 User Manual Download Page 2

EXB1 Recumbent Exercise Bike 

 

 

E&OE 

© 2017 HPF/Proflex 

Safety 

Basic precautions, including the following important safety instructions, should always be followed 
when using this equipment. Read all instructions before use. 

Before beginning any exercise program, consult your physician. This is especially 
important for people over 35 years of age or who have pre-existing health problems. Read 

all instructions before using any fitness equipment. Do not operate this exercise equipment without 
properly fitted guards, as the moving parts can present a risk of serious injury if exposed. 

 

Use this product for its intended use only as described in this user manual. Do not use 
attachments not supplied or recommended by the manufacturer. 

 

Maximum weight capacity = 120 kg.

 

 

Do not attempt any maintenance or adjustments other than those described in this user 
manual. Should any problems arise, discontinue use and consult an authorized service centre 
or personnel. 

 

Any information or data provided by the equipment is a guide only and is not to be used as 
medical data or scientific evidence. 

 

Do not use the unit outdoors. 

 

Keep children and pets away from the equipment while in use. 

 

Elderly or disabled users should only use the equipment in the presence of an adult who can 
provide assistance if required. 

 

Do not operate where aerosol (spray) products are in use or where adequate oxygen is not 
available. 

 

Keep dry – do not operate in wet or moist conditions. 

 

Keep the unit on a solid, level surface with a minimum safety area clearance of two meters 
around it. Be sure the area around the equipment remains clear of any obstructions during use. 

 

The equipment is for domestic household use only. 

 

One person only should use the equipment at a time. 

 

Wear comfortable and suitable clothing when using the equipment. Do not use the equipment 
barefoot or in socks. Always wear appropriate, enclosed athletic footwear. Never wear loose or 
baggy clothing as it can become caught on the equipment and create a hazard. 

 

Always hold on to the handrails while using the equipment. 

 

Do not leave children unsupervised near or on the equipment. 

 

Children should not be allowed to play or operate the equipment at any time. 

 

This equipment is not intended for use by persons (including children) with reduced physical, 
sensory or mental capabilities, or lack of experience and knowledge, unless they have been 
given supervision or instruction concerning use of the equipment by a person responsible for 
their safety. 

 

Keep hands clear of all moving parts. Never place hands or feet off the handles or pedals while 
the equipment is in use. 

 

Before using the equipment, check that all visible fasteners are sufficiently tightened and 
secure. 

 

Handle or move the equipment with due care to avoid personal injury or damage to the 
equipment. 

 

 

Summary of Contents for PROFLEX EXB1

















Reviews: