EXB1 Recumbent Exercise Bike
E&OE
© 2017 HPF/Proflex
8
12. Bring the vertical handlebar (
19
) into position against the front mounting tube so the
handlebars are facing up and towards the rear of the machine, and the brackets are aligned.
Then, attach it using the 2 pre-assembled screws (
20
) and lock washers (
21
) and tighten
(rotate right) using the Allen key, then clip the cover (
22
) into position.
13. Remove the pre-assembled screws from the rear of the console (
23
), then connect the wiring
between the console and front mounting tube (
K
). Attach the console to the top of the front
mounting tube using the 2 screws (
L
) – there are two possible positions – use the one most
comfortable for you.
It is critical that you follow the pedal arm to crank attachment procedure carefully to
ensure correct assembly
. • During assembly, do NOT use excessive force to screw the
pedals into the crank arms – this may indicate misalignment of the pedals or mis-matched threads.
J
K
23
L
19
22
21
20
