Home
/
HPE
/
Synergy Image Streamer 5.2
/
User Manual

HPE Synergy Image Streamer 5.2, User Manual, Page: 90 / 96

Share

75 pages before
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96

Page: 90 / 96

HPE Synergy Image Streamer 5.2 User Manual Download Page 90

Document:

Provides:

Support Matrix

The latest software and firmware requirements, supported hardware, and
configuration maximums for HPE Synergy Image Streamer.

User Guide

The OS deployment process using HPE Synergy Image Streamer, features of
HPE Synergy Image Streamer, and purpose and life cycle of HPE Synergy
Image Streamer artifacts. Also includes authentication, authorization, and
troubleshooting information for HPE Synergy Image Streamer.

GitHub

The repository (

github.com/HewlettPackard) contains sample artifacts and

documentation on how to use the sample artifacts. Also contains technical
white papers explaining deployment steps that can be performed using HPE
Synergy Image Streamer.

Help

Information about basic HPE Synergy Image Streamer concepts and user
interface based tasks.

HPE OneView for HPE Synergy

Support Matrix for HPE Synergy

The latest software and firmware requirements, supported hardware, and
configuration maximums for HPE OneView.

User Guide and Help for HPE Synergy

Resource features, planning tasks, configuration quick start tasks,
navigational tools for the graphical user interface, and more support and
reference information for HPE OneView.

Global Dashboard User Guide and Help

Instructions for installing, configuring, navigating, and troubleshooting the
HPE OneView Global Dashboard.

Troubleshooting Guide for HPE Synergy Common procedures for troubleshooting HPE OneView, which is embedded

on the HPE Synergy Composer.

Troubleshooting resources

Troubleshooting screens within the tool, online help, and a troubleshooting
guide.

HPE Synergy firmware update resources

HPE OneView for HPE
Synergy:

Provides:

Firmware and Driver Update
Guide

Information on how to update the firmware and recommended best practices to update
firmware and drivers through HPE OneView.

The HPE Synergy Software Release Information site (

https://www.hpe.com/info/synergy-sw-release-information)

provides an interactive resource for firmware update information. HPE Synergy firmware update resources are also
available within HPE OneView.

HPE Synergy documentation resources

90

«
...
88
89
90
91
92
...
»

Summary of Contents for Synergy Image Streamer 5.2

































































































Reviews:

No comments