Screen component
Description
Firmware
The version number of the firmware running on the Image Streamer appliance and the date the
firmware was last updated.
Appliances
For an appliance cluster, the following items are displayed first for the local appliance and then
for the peer appliance.
For a standalone appliance, the following items are only displayed once.
Identifier
Identifies the individual appliance by its enclosure and appliance bay.
State
Icon and text indicating the state of the appliance from the perspective of
the local appliance. For example, the state for a peer appliance could be
Not connected
, but that could not apply to a local appliance.
IP address
The maintenance IP address associated with the individual appliance. The
maintenance IP address is used to connect to the appliance maintenance
console, but not with the UI.
Serial number
The serial number of the appliance hardware.
Maintenance console appliance states
The appliance maintenance console displays an icon and a message in the upper right corner about the state of the
appliance. The state might depend on the situation, especially for a highly available appliance cluster, and an action might
also be required.
State
Situation
Action
Active
The local appliance is the active appliance of the
appliance cluster and is running normally.
Active
Disk has failed
Not an appliance cluster.
Contact your authorized technical
support to replace the failed disk
The disk of the active appliance has failed.
The standby appliance assumes control as the
single appliance.
Contact your authorized technical
support to replace the failed disk
The disk of the standby appliance has failed.
The active appliance continues operating as a
single appliance.
Contact your authorized technical
support to replace the failed disk
Table Continued
Image Streamer Maintenance Console
66