Prerequisites
Before installing this option, be sure that you have the following:
• The components included with the hardware option kit
• T-10 Torx screwdriver
Procedure
1. Observe the following alerts:
WARNING: To reduce the risk of personal injury from hot surfaces, allow the drives and the internal system
components to cool before touching them.
CAUTION: To prevent damage to electrical components, properly ground the server before beginning any
installation procedure. Improper grounding can cause electrostatic discharge.
3. Disconnect all peripheral cables from the server.
4. Remove the GPU tray from the chassis.
5. Place the GPU tray on a flat, level work surface.
6. With a T-10 Torx screwdriver, install the GPU bridge on the GPUs using the 12 screws supplied with the kit.
7. Connect all peripheral cables to the server.
8. Install the GPU tray.
More information
Remove the GPU tray from the chassis
Installing a GPU tray
Hardware options installation
71
