Item
Description
Definition
1
Power On/Standby button and
LED
Solid green = System on
Flashing green = Performing power-on sequence
Solid amber = System in standby
Off = No power present
2
UID LED
1
Solid blue = Activated
Flashing blue:
• 1 flash per second = Remote management or firmware
upgrade in progress
• 4 flashes per second = iLO manual reboot sequence initiated
• 8 flashes per second = iLO manual reboot sequence in
progress
Off = Deactivated
3
Health LED
1
Solid green = Normal
Flashing green = iLO is rebooting
Flashing amber = System degraded
Flashing red = System critical
4
NIC link LED
Solid green = Network link
Off = No network link
5
NIC status LED
Flashing green = Network active
Off = No network activity
When these LEDs flash simultaneously, a power fault has occurred. For more information, see
Front panel LED power fault codes.
Facility power is not present, power cord is not attached, no power supplies are installed, power supply failure has occurred, or the node
power button cable is disconnected.
If the Health LED indicates a degraded or critical state, review the system IML or use iLO to review the system health status.
System board module components
The system board module consists of a system board and a midplane interposer.
Component identification
12