Configuration
Enabling video on monitor
To enable video on monitor during installation and inside the OS, you must disable iLO video. The
procedure for disabling iLO video depends on the operating system. Perform one of the following
procedures depending on the OS installed:
•
on page 22
•
Enabling video on monitor for Windows 7
on page 23
•
Enabling video on monitor for Linux (except RHEL 7.3 and CentOS 7.3)
on page 24
Enabling video on monitor for Windows 2012, Windows 8, Windows 8.1,
Windows 10, RHEL 7.3, and CentOS 7.3
To enable video on monitor during installation and inside the OS, you must disable iLO video.
When you disable iLO video, you will lose the video on the iLO Integrated Remote Console after the
cartridge enters BIOS.
Procedure
1.
Connect the monitor to the cartridge.
2.
3.
When the BIOS screen is displayed, press the
F9
key.
4.
Go to
System Options
->
BIOS/Platform Configuration (RBSU)
->
Advanced Options
->
Video
Options
.
5.
Select
Integrated/Add-in Video Enabled, iLO Video Disabled
.
22
Configuration
