Turn the access panel over to locate the HPE Moonshot 1500 Chassis label. This label provides
information on LED status indicators, component identification, and cartridge and switch installation
procedures.
Remove the cartridge blank
CAUTION:
For proper cooling, be sure that a cartridge or a cartridge blank is always installed in each cartridge
slot in the chassis. When replacing a cartridge, leave the cartridge slot empty for no more than 30
seconds. Failure to do so can disrupt airflow in the chassis.
Procedure
1. Extend the chassis from the rack
on page 11.
3.
Remove the cartridge blank from the chassis.
Remove the cartridge blank
13
