4.
Proceed to
Preparing the server blade for operation
Preparing the server blade for operation
Procedure
1.
Install any options or cables previously removed to access the TPM connector.
Enabling the Trusted Platform Module
When enabling the Trusted Platform module, observe the following guidelines:
• By default, the Trusted Platform Module is enabled as TPM 2.0 when the server blade is powered on
after installing it.
• In UEFI Boot Mode, the Trusted Platform Module can be configured to operate as TPM 2.0 or TPM
1.2.
• In Legacy Boot Mode, the Trusted Platform Module configuration can be changed between TPM 1.2
and TPM 2.0, but only TPM 1.2 operation is supported.
Enabling the Trusted Platform Module as TPM 2.0
Procedure
1.
During the server blade startup sequence, press the
F9
key to access
System Utilities
.
2.
From the System Utilities screen, select
System Configuration
>
BIOS/Platform Configuration
(RBSU)
>
Server Security
>
Trusted Platform Module options
.
3.
Verify the following:
72
Hardware options installation
