42
100-Megabit SFP modules
Table 14 100-Megabit SFP transceiver modules
Product
Code
Description
Central
wavelengt
h
(nm)
Fiber diameter (
μ
m)
Maximum
transmission
distance
JD102B
HPE X115 100M
SFP LC FX
Transceiver
1310
50/125
2 km (1.24 miles)
62.5/125
JD120B
HPE X110 100M
SFP LC LX
Transceiver
1310
9/125
15 km (9.32 miles)
JD090A
HPE X110 100M
SFP LC LH40
Transceiver
1310
9/125
40 km (24.86 miles)
USB port
The switch has one OHCI-compliant USB 2.0 port that can upload and download data at a rate up to
480 Mbps. You can use this USB port to access the file system on the Flash of the switch, for
example, to upload or download application and configuration files.
The USB port supplies power as per USB 2.0 specifications. Use only USB 2.0-compliant USB
devices for the USB port. The port might not identity USB devices that are not compliant with USB
2.0.
NOTE:
USB devices from different vendors vary in compatibilities and drivers. Hewlett Packard Enterprise
does not guarantee correct operation of USB devices from other vendors on the switch. If a USB
device fails to operate on the switch, replace it with one from another vendor.
SFP+ port
The switch provides two SFP+ ports. You can install ,10-Gigabit SFP+ transceiver modules in
Table
15
, 10-Gigabit SFP+ network cables in
Table 16
, or Gigabit SFP transceiver modules in
Table 17
in
the SFP+ ports as needed.
Table 15 10-Gigabit SFP+ transceiver modules available for the SFP+ ports
Product
Code
Description
Central
wavelength
(nm)
Fiber
diameter (
μ
m)
Multimode
fiber modal
bandwidth
(MHz*km)
Maximum
transmission
distance
JD092B
HPE X130
10G SFP+ LC
SR
Transceiver
850
50/125
2000
300 m (984.25 ft)
500
82 m (269.03 ft)
400
66 m (216.54 ft)
62.5/125
200
33 m (108.27 ft)
160
26 m (85.30 ft)
