HPE FlexFabric 5950 32QSFP28 Installation Manual Download Page 10

Page: 10 / 53

Mounting brackets, chassis rails, and grounding cable
installation positions

The HPE FlexFabric 5950 switches provides the following installation positions on the chassis sides
for the installation accessories:

Mounting

brackets

—Power module-side mounting position, port-side mounting position, and

middle-mounting position.

Chassis

rails

—Three installation positions at the power module side and three at the port side.

Grounding

cable

—A primary grounding point (with a grounding sign) and an auxiliary

grounding point.

Select installation positions for the mounting brackets, chassis rails, and grounding cable as
required.

Figure 5 Mounting brackets and grounding cable installation positions on the HPE
FlexFabric 5950 32QSFP28/HPE FlexFabric 5950 32QSFP28 TAA

(1) Power module-side mounting position

(2) Primary grounding point

(3) Middle-mounting position

(4) Auxiliary grounding point

(5) Port-side mounting position

Figure 6 Chassis rail mounting positions on the HPE FlexFabric 5950 32QSFP28/HPE
FlexFabric 5950 32QSFP28 TAA

(1) Chassis rail installation position 1

(2) Chassis rail installation position 2

(3) Chassis rail installation position 3

(4) Chassis rail installation position 4

Summary of Contents for FlexFabric 5950 32QSFP28






















































Search results

Summary of Contents for FlexFabric 5950 32QSFP28

Reviews:

Related manuals for FlexFabric 5950 32QSFP28

Brands by name

Popular brands

HPE FlexFabric 5950 32QSFP28, Installation Manual

Search results

Summary of Contents for FlexFabric 5950 32QSFP28

Reviews:

Related manuals for FlexFabric 5950 32QSFP28

Brands by name

Popular brands