53
Figure 73 Rear panel
(1) System status LED (SYS)
(2) Management Ethernet port
(3) Serial console port
(4) USB mini console port
(5) USB port
(6) Fan tray 1
(7) Fan tray 2
(8) Grounding screw (auxiliary grounding point 2)
(9) Power supply 4
(10) Power supply 3
(11) Power supply 2
(12) LINK LED for the management Ethernet port
(13) ACT LED for the management Ethernet port
(14) Power supply slot 1
The HPE 5940 4-slot switch comes with a filler panel in each interface module slot except slot 1. You
can install one to four interface modules for the switch as needed. In
, the LSWM18QC
interface modules are installed in the interface module slots. For more information about installing
and removing interface modules, see "
Installing/removing an interface module
."
The HPE 5940 4-slot switch comes with the four power supply slots empty and two filler panels as
accessories. You can install two to four power supplies for the switch as needed. In
, four
650W AC power supplies are installed in the power supply slots. For more information about
installing and removing power supplies, see "
Installing/removing a power supply
The HPE 5940 4-slot switch comes with the two fan tray slots empty. You must install two fan trays of
the same model for the switch. In
, two LSWM1BFANSC fan trays are installed in the fan
tray slots. For more information about installing and removing fan trays, see "
Figure 74 Left side panel
(1) Primary grounding point
(2) Auxiliary grounding point 1
4
1
2
3
5
6
7
8
9
10
11
12
13
14
1
2
