98
Once Firmware upgrade using web is started, the regular IPMI command will not be allowed for
safety concern if Enable IPMI Command handling during flashing support is disabled in project
configuration.
To configure, choose ‘
Firmware Image Location
’ under
Maintenance
. To open Firmware Update page,
click
Maintenance
>
Firmware Update
from the menu bar.
The following is a sample screenshot of the Firmware Update page.
The various fields of Firmware Update are as follows:
·
Preserve all Configuration:
To preserve all configuration.
·
Edit Preserve Configuration:
To modify the Preserve status settings.
·
Select Firmware Image:
To select the Firmware image to be uploaded.
·
Start Firmware Update:
To start the Firmware Update.
This wizard takes you through the process of AMI based firmware upgradation. The protocol information
to be used for firmware image transfer during this update is as follows:
