1
Ϯ
.2 Firmware Image Location
This page is used to configure firmware image into the BMC.
To open
Firmware Image Location
, click
Maintenance
>
Firmware Image Location
from the menu bar.
7KH
IROORZLQJLVD
sample screen
shot of
WKH
Firmware Image Location
page.
The various options of Image Transfer Protocol are given
LQWKHIROORZLQJVHFWLRQ
.
Image Location Type:
Type of location to transfer the firmware image into the BMC either Web
Upload during
Flash
or
TFTP Server
.
TFTP Server Address:
Address of the server where the firmware image is stored.
7KH6HUYHUVXSSRUWVERWK,3YDQG,3YDGGUHVVHV
,3$GGUHVVPDGHRIQXPEHUVVHSDUDWHGE\GRWVDVLQ³[[[[[[[[[[[[´
(DFKQXPEHUUDQJHVIURPWR
)LUVWQXPEHUPXVWQRWEH
,3Y$GGUHVVPDGHRIJH[DGHFLPDOGLJLWVVHSDUDWHGE\FRORQDVLQ
³[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[´
+H[DGHFLPDOGLJLWVDUHH[SUHVVHGDVORZHUFDVHOHWWHUV
TFTP Image Name:
Full Source path with filename of the firmware image is stored on TFTP Server.
TFTP Retry Count:
Number of times to be retried in case a transfer failure occurs. Retry count ranges from 0 to
255.
Save:
To save the configured settings.
Procedure
1. Select the
Image Location Type (Web Upload during flash/ TFTP Server).
2. If the protocol selected is TFTP, enter the IP address of the server in the
TFTP Server Address
field.
3. Enter the
TFTP Image Name
in the given field.
96
