Item
Description
Quantity
4
Air pressure tubing kit with brackets (not
shown)*
1
5
Leveling pads
2
6
M6 x 1 x 10 Flathead Torx trilobe screws 16
7
M5.5 x 13 Torx screws
6
8
HPE G2 Rack Baying Kit (Contains
brackets and screws used to bay the
racks together on either a 600mm or 24-
inch pitch.)
2
Worm drive hose and tube clamps
2
Panduit boots
2
Gasket, 15 x 15
1
Masterkleer PVC clear tubing, 6 ft.
2
Safety, compliance, & warranty
information
1
*The HPE ARCS Air Pressure Tubing Kit contains the following components:
• Aluminum pipe, 1/8" diameter X 18" long, threaded on both ends
• Aluminum end cap, 1/8" diameter
• Barbed, threaded NPTF hose end, 1/8" diameter
• Pipe clamp, galvanized, 3/8"ID X 9/16" long (for HPE Adaptive Rack Cooling System)
• Pipe clamp, galvanized, 3/8"ID X 11/16" long (for HPE ARCS 42U/48U 600x1600mm Racks)
• Screw, 5.5x1.81x10 Pan Torx T25
• Flat washer, M6
• Plastic barbed tube fittings for air & water, 1/8"
• Polyurethane Tubing for Water, 5/32"ID, 1/4" OD
HPE ARCS Power Cord Kit
The HPE ARCS Power Cord Kit contains:
• IEC 60309 32/30A 220/415V 6h/IP44 power cord (Quantity 2)
• NEMA L22-20P 277/480V 4P/5W power cord (Quantity 2)
HPE ARCS Air Rack Accessory Kit
The HPE ARCS Air Rack Accessory Kit comes with the HPE ARCS 42U/48U 600x1600mm Racks. Use
the parts included in this kit to properly install the racks.
Installation
17
