348
[Switch] line vty 0 63
[Switch-line-vty0-63] authentication-mode scheme
[Switch-line-vty0-63] quit
# Create a local device management user
client001
.
[Switch] local-user client001 class manage
# Specify the plaintext password as
aabbcc
and the service type as
ssh
for the user.
[Switch-luser-manage-client001] password simple aabbcc
[Switch-luser-manage-client001] service-type ssh
# Assign the user role
network-admin
to the user.
[Switch-luser-manage-client001] authorization-attribute user-role network-admin
[Switch-luser-manage-client001] quit
# Create an SSH user
client001
. Specify the service type as
stelnet
and the authentication
method as
password
for the user. By default, password authentication is used if no SSH user
is created.
[Switch] ssh user client001 service-type stelnet authentication-type password
2.
Establish a connection to the Stelnet server:
There are different types of Stelnet client software, such as PuTTY and OpenSSH. This
example uses an Stelnet client that runs PuTTY version 0.58.
To establish a connection to the Stelnet server:
a.
Launch PuTTY.exe to enter the interface shown in
b.
In the
Host Name (or IP address)
field, enter the IP address
192.168.1.40
of the Stelnet
server.
Figure 96 Specifying the host name (or IP address)
