209
Step Command
Remarks
default.
•
In FIPS mode, the global
password control feature is
enabled by default, and
cannot be disabled.
3.
(Optional.) Enable a specific
password control feature.
password-control
{
aging
|
composition
|
history
|
length
}
enable
By default, all four password
control features are enabled.
Setting global password control parameters
The password expiration time, minimum password length, and password composition policy can be
configured in system view, user group view, or local user view. The password settings with a smaller
application scope have higher priority. Global settings in system view apply to the passwords of the
local users in all user groups if you do not configure password policies for these users in both local
user view and user group view.
The
password-control login-attempt
command takes effect immediately and can affect the users
already in the password control blacklist. Other password control configurations do not take effect on
users that have been logged in or passwords that have been configured.
To set global password control parameters:
Step Command
Remarks
1.
Enter system view.
system-view
N/A
2.
Set the password expiration
time.
password-control aging
aging-time
The default setting is 90 days.
3.
Set the minimum password
update interval.
password-control
update-interval interval
The default setting is 24 hours.
4.
Set the minimum password
length.
password-control length length
•
In non-FIPS mode, the
default setting is 10
characters.
•
In FIPS mode, the default
length is 15 characters.
5.
Configure the password
composition policy.
password-control composition
type-number type-number
[
type-length
type-length
]
•
In non-FIPS mode, by
default, a password must
contain at least one
character type and at least
one character for each type.
•
In FIPS mode, by default, a
password must contain at
least four character types
and at least one character
for each type.
6.
Configure the password
complexity checking policy.
password-control complexity
{
same-character
|
user-name
}
check
By default, the system does not
perform password complexity
checking.
7.
Set the maximum number of
history password records for
each user.
password-control history
max-record-num
The default setting is 4.
8.
Specify the maximum
number of login attempts
and the action to be taken
when a user fails to log in
password-control login-attempt
login-times
[
exceed
{
lock
|
lock-time
time
|
unlock
} ]
By default, the maximum number
of login attempts is 3 and a user
failing to log in after the specified
