manualshive.com logo in svg

HP ZX2000, Technical Reference Manual, Page: 89 / 136

Share
Download
HP ZX2000 Technical Reference Manual Download Page 89

technical reference guide

4–5

Troubleshooting

LEDs

Several LEDs are on the front bezel of the workstation. See the following sections for a detailed 
description of these functions.

power and system LEDs

The power and system LEDs indicate the overall state of the system:

activity LED

The Activity LED indicates the state of disk and drive activity on the system. 

NOTE

: The Activity LED is only active on systems purchased after March 2003. 

NOTE: 

The Activity LED automatically communicates with IDE HDD or optical drives. To 

communicate with SCSI drives, a SCSI LED activity cable must connect the SCSI card and the 
system board. 

Power LED

System LED

State

Off

Off

Off or on Standby

On (green)

Solid green

Running normally

On (green)

Blinking green (1/sec.)

Booting

On (green)

Blinking orange (1/sec.)

Attention (See “<$elemtext7)

On (green)

Blinking red (2/sec.)

Fault (See “<$elemtext7)

Activity LED

State

Off

Off or no current disk/drive activity

Blinking (green)

Disk/drive is being accessed

Summary of Contents for ZX2000









































































































































Reviews:

No comments