HP ZX2000 Technical Reference Manual Download Page 125

Page: 125 / 136

technical reference guide

D–1

event, error and warning messages

This appendix contains event, error and warning information for the zx2000 system, including:

■

EFI Error and Warning Messages

■

IPMI Event Messages

■

Sensor Data Record Repository (SDRR)

EFI error and warning messages

EFI error and warning messages are displayed on the console as part of the boot process. They
can also be retrieved via the

info warnings

EFI command.

Error Number

Error/Warning Message

Solution

Insufficient resources to assign to one or
more I/O devices

—

Failed I/O socket(s) deconfiguration

—

Unexpected hardware I/O configuration

—

No BMC installed in platform

Ensure the BMC ROM is installed;
update BMC firmware.

BMC cannot be accessed

Check BMC logs for errors.

One or more BMC ports failed

—

BMC system event log is full

Clear SEL.

Platform SCR is bad

Call support center.

Set time to BMC SEL failed

—

SEL get info failed

—

Initial BMC SEL event failed

—

Update of BMC buffered data failed

—

All ACPI BMC ports bad

—

Read error on BMC token

—

BMC token transmit checksum error

—

Error writing BMC token on download

—

Summary of Contents for ZX2000









































































































































Search results

Summary of Contents for ZX2000

Reviews:

HP ZX2000, Technical Reference Manual, Page: 125 / 136

Search results

Summary of Contents for ZX2000

Reviews: