Clearing passwords
If you forget the password, you cannot access the workstation.
For instructions about clearing passwords, see
Configuring password security and resetting CMOS
on page 197
.
Chassis security
Side access panel key lock
The side access panel contains a key lock to prevent the panel from being removed.
The key is fastened to the workstation rear panel when shipped from the factory.
Side access panel sensor (Smart Cover Sensor) (optional)
The optional Side access panel sensor is a combination of hardware and software technology that can
alert you when the workstation side access panel has been removed (if the sensor has been configured
in the Computer Setup (F10) Utility).
The three levels of Side access panel sensor protection are shown in the following table:
Table 4-4
Side access panel sensor protection levels
Level
Setting
Description
Level 0
Disabled
Side access panel sensor
*
is disabled (default).
Level 1
Notify User
When the workstation restarts, a message appears indicating that the
workstation side access panel has been removed.
Level 2
Setup Password
When the workstation is restarted, a message appears indicating that the
workstation side access panel has been removed. You must enter the setup
password to continue.
*
Side access panel sensor settings can be changed using the Computer Setup (F10) Utility.
58
Chapter 4 System management
ENWW
