HP Vectra VL410, Deployment Manual

Page: 65 / 108

HP Toptools
HP Toptools Deployment Guide Version 5.5
65
# cd /dev
# ./MAKEDEV sg
# cd -
After that, install Netserver Agents package:
# dpkg -i -G /tmp/agents-lx-5.50.xx-yy_debian22.i386.deb
8. No system reboot is necessary.
How to verify that the Netserver Agents are Running
To make sure Netserver Agents are running on the machine verify if the following services are running:
hpasrsvc, hpcagsvc, hpesysvc, hpevcsvc, hpevttrapd, hplersvc, hpnictrapd, hppfmsvc, hprccsvc,
hpsdnsvc, hpsftsvc, hpswvsvc, hptatsvc, hpvcptrapd and snmpd.
Notice that hpsftsvc service will only be running if the system has a hard disk cage installed. The
command to verify the status of a service is:
For Red Hat:
# /sbin/service <service_name> status
The output should be similar to:
<service_name> (pid <process id>) is running...
For SuSE:
# /sbin/init.d/<service_name> status
The system replies with:
- No process, if the service is not running.
- OK, if the service is running.
For Debian
# ps axo command | grep <service_name>
The command will output:
- the service name, if it's running;
- nothing, otherwise.
Uninstall
For distributions based on RPM
If you wish to remove the Netserver Agents from your system, execute the following steps, logged on as
root:
# rpm -e agents_lx
# rpm -e hpserver-core
Notice that the hpserver-core package may be in use by other HP products and if so the last command
will tell you and will not uninstall the package.
No reboot is necessary.
Notice that rpm displays a warning messages about missing files. You can safely disregard these
messages.
The uninstall of the Netserver Agents does not remove the history data files from your computer, enabling
the Agents to keep historic information after a package upgrade.