HP Vectra VL410, Deployment Manual

Page: 19 / 108

HP Toptools
HP Toptools Deployment Guide Version 5.5
19
If the target system is a member of a workgroup, the domain list-box will not be shown. The HP Toptools
installation wizard will create the user account, and you will be instructed that the specified account (user
name and password) will need to be present on each managed system where functionality such as WMI
access and agent deployment is desired.
The toptools user groups
The HP Toptools installation wizard will create the “toptools”, “toptools operators” and “toptools admins”
user groups on the HP Toptools system.
If the HP Toptools installation wizard is upgrading a toptools 5.0 installation and the system is a member
of a domain, all members of the existing domain groups, “toptools”, “toptools operators” and “toptools
admins” will be added to the local groups under the same name. If the target system is a member of a
workgroup, the local groups defined from toptools 5.0 will remain and be used by HP Toptools.
The HP Toptools installation wizard will configure toptools directory security using the locally defined
“toptools, “toptools operators” and “toptools admins” user groups.
Step 12. The toptools program group
If this is a first time install, you will be asked to specify the name of the toptools program group in which
the HP Toptools installation wizard will create its program icons. The default is “HP Toptools”. This
program group will be created under an “hp management software” program group.
If toptools is already installed, this dialog is not shown. However, the existing “HP Toptools” group and
icons will be moved under the new “hp management software” program group.