manualshive.com logo in svg

HP Vectra VL410, Deployment Manual

Share
Download
HP Vectra VL410 Deployment Manual Download Page 21

 

HP Toptools 

HP Toptools Deployment Guide Version 5.5 

 

 

21

 

 

Step 16. AutoLogon feature 

The AutoLogon feature allows you to supply your password for purposes of allowing the HP Toptools 
installation wizard to log you back into Windows NT automatically when there are required software 
components installed that force a reboot of the system.  This feature is not presented on Windows 2000 
systems because reboots are not required. 
 
If you decide not to use the AutoLogon feature, you will be required to supply your password after each 
system reboot.   
 

Step 17. Install software 

The HP Toptools installation wizard will now install all required/selected software onto the target system.  
The HP Toptools installation wizard will reboot the system when necessary and pickup where it left off 
until all software is installed. 
 
If a software component fails to install correctly, the HP Toptools installation wizard will present you with 
two or three choices.  If the failed component was a required component or the HP Toptools device 
manager, you are asked to “retry” or “cancel”.  If the failed component was any other component, you can 
“retry”, “cancel” or “skip”.  “retry” will re-run the install of the failed component. (a repeated try of a 
component install will sometimes be successful.)  “skip” will simply skip over the failed component and 
move onto the next component to be installed.  “cancel” will exit the HP Toptools installation wizard. 
 

Step 18. The toptools database updates 

If the HP Toptools installation wizard was able to connect to the hp website at the beginning of the 
installation, then the latest data available will be downloaded and used to populate the toptools 
databases.  If a connection to the hp website is not available, the data on the installation media will be 
used to populate the toptools databases. 
 

Step 19. Check for patches 

After all software has been installed, the HP Toptools installation wizard asks to check the HP Toptools 
website for any patches or updates that may be available for components installed on the system. 
 

Summary of Contents for Vectra VL410













































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands