Speakers and sound
Symptom
Possible solution
Volume is very
low or
unsatisfactory.
Ensure that you connected the speakers to the Audio Out connector on the back of the
computer. (Additional audio connectors are used for multiple-channel speakers.) Detached
non-powered speakers (speakers without a separate power source, such as batteries or a
power cord) do not produce satisfactory sound. Replace the non-powered speakers with
powered speakers.
No sound is
produced.
For Windows 7:
1.
Tap the
Start
button, tap
Control Panel
, tap
Action Center
, and then tap
Troubleshooting
.
2.
Under
Hardware and Sound
, tap
Troubleshoot and audio playback
.
If you are using built-in computer speakers, use the Volume button to adjust volume. You
can also use My Display TouchSmart Edition to ensure that the volume is set appropriately.
Ensure that you connected powered (active) speakers and that they are turned on.
Turn off your computer, and then unplug and reconnect the speakers. Ensure that the
speakers are connected to an audio connector, not a Line In or headphone connector.
To resume from Sleep mode, press the Sleep button (select models only), or press Esc.
Unplug headphones if they are connected to your computer (or speaker system).
When external
speakers are
connected, the
audio is muted.
When an Audio Line Out connector (such as headphones or external speakers) is
connected, the internal speakers are muted.
Internet access
Symptom
Possible solution
Internet programs
do not start
automatically.
Log in to your Internet Service Provider (ISP), and start the desired program.
ENWW
Speakers and sound
21
Summary of Contents for TouchSmart 320-1030
Page 1: ...Getting Started ...
Page 4: ...iv ENWW ...