14
TippingPoint 10 Overview
Figure 3-2 shows the chassis back panel for a TippingPoint 10.
The TippingPoint 10 ships with the following pre-installed components:
•
Two 10/100/1000 Gigabit Ethernet segments supporting up to 20 Mbps aggregate across all
segments
•
One 10/100/1000 Gigabit Ethernet management port
•
One serial console RJ-45 port (Pinout: 1-RTS, 2-DTR, 3-TXD, 4-GND, 5-GND, 6- RXD, 7-DSR, 8-CTS)
•
Two USB ports
LEDs
The following table describes the status LEDs used by the TippingPoint 10.
Figure 3-2
TippingPoint 10 - Back Panel
Table 3-1
TippingPoint 10 LEDs
LED
Location
Description
Power
The right side of the front panel.
Green
: Indicates that the device has
power and is running.
Status
The right side of the front panel,
above the Power LED.
Off
: No power
Yellow
: Device is booting OR one of
the following faults has occurred:
•
A Critical or Error event in the
system log
•
A thermal, memory, or disk alert
•
High availability failover status
due to another event
Green
: The device is running
normally.
Link
The right side of each RJ45 port.
Green
: The link on the port is active.
No light
: The link is down.
Packet Activity The left side of each RJ45 port.
Flashing Yellow
: The port is passing
data.
Solid Yellow
: Link is present, but
there is no packet activity.
No light
: No data is passing.
