HP TippingPoint 10 Hardware Installation And Safety Manual Download Page 31

Page: 31 / 40

TippingPoint 10/110/330 Hardware Installation and Safety Guide

TippingPoint 110/330 Overview

This chapter introduces TippingPoint concepts and functionality. It provides an overview of the

TippingPoint 110 and the TippingPoint 330.

Overview

This chapter details the components, chassis, requirements, and installation of the TippingPoint 110 and

TippingPoint 330 IPS. This information applies to the following part numbers:

Before you begin the installation process, obtain the

TippingPoint Command Line Interface Reference

. After

the components are installed, the TippingPoint Setup Wizard guides you through the rest of the installation

and configuration procedures.
This chapter includes the following topics:

•

•

Technical Specifications

” on page 25

•

”

Hardware Installation and Configuration

” on page 26

Chassis Overview

The TippingPoint 110/330 systems comprise a 1U chassis that provides access to four network segments.

The models differ in the levels of network traffic supported.
The following figures show the front and back chassis interfaces for the TippingPoint 110/330.

Device

HP SKU

TippingPoint SKU

TippingPoint 110 Copper Port

JC186A

TPRN0110CAS96

TippingPoint 330 Copper Port

JC187A

TPRN0330CAS96

Figure 4-1

TippingPoint 110/330 - Front Panel

Summary of Contents for TippingPoint 10









































Search results

Summary of Contents for TippingPoint 10

Reviews:

Related manuals for TippingPoint 10

Brands by name

Popular brands

HP TippingPoint 10, Hardware Installation And Safety Manual

Search results

Summary of Contents for TippingPoint 10

Reviews:

Related manuals for TippingPoint 10

Brands by name

Popular brands