Installation and Reference Guide
A-3
Product Specifications
A
Power Supply Specifications
The power supply is universal and capable of functioning worldwide without using voltage jumpers
or switches. It meets IEC 61000-4-5 surge voltage requirements and is autoranging in terms of
accommodating input voltages and line frequencies.
The power supply specifications for the FC Entry Switch 8B and FC Switch 8B are listed in the
following table.
Environmental Requirements
The environmental ranges that are acceptable when the FC Entry Switch 8B or FC Switch 8B is
operating and when it is not operating are listed in the following table.
General Specifications
The switch supports F_Port, FL_Port, and E_Port connections and DNS (Distributed Name
Server). It is EMC (Electromagnetic Compatibility) compliant.
Specification
Value
Outlet
Correctly wired and earth-grounded
Maximum output
75 watts
Maximum system power consumption 50 watts
Input voltage
90-264 VAC
Input line frequency
47 - 63 Hz
Harmonic distortion
Active power factor correction per IEC1000-3-2
BTU rating
60 watts x 3.412 BTU/hr/watts = 204.72 BTU/hr
Inrush current
40 amps maximum, cold start at 25°C
Input line protection
Fused in hot line
Condition
Acceptable Range
During Operation
Acceptable Range
During Non-Operation
Temperature
10°C to 40°C
-35°C to 65°C
Humidity
20% to 85% RH non-condensing, at 40°C
85% RH non-condensing, at 70°C
Altitude
0 to 3 kilometers above sea level
0 to 12 kilometers above sea level
Shock
4 G, 11 MS duration, half sine
20 G, 11 MS duration, sq.wave
Vibration
5 G, 0-3 kHz at 1.0 octave/minute
10 G, 0-5 kHz at 1.0 octave/minute
