HP Surestore Tape Library Model 3/30, Hardware Operator'S Manual

Page: 54 / 62

Hardware Operator’s Guide
X–2
DLT Library
!!' ##" $
The library menu
offering library utility selections.
#
The mechanism used by the library
robot to open and close tape drives for mounting
and dismounting cartridge tapes.
M
Meter.
$
The top–level menu on the
operator panel display.
$"
A hierarchical list of selections on the
library operator panel, providing the user interface
to the library.
Millimeter.
"
Megabytes per second.
$#
To insert a cartridge into a drive.
Millivolt.
O
!#!
The user interface to the
library.
!#! #!"
The MENU ,
ENTER , Up and Down Arrows, and SYSTEM
RESET
buttons on the library operator panel.
!#! "
The Library Active,
CAP Open, and Service Required LEDs on the
library operator panel.
P
! "
The mechanism on the
hand/camera assembly that latches onto cartridge
tapes and pulls them into the hand.
$" !"
Two levers on the picker
mechanism that push the cartridge into a storage
cell.
R
!#
The mechanism that moves cartridge tapes
to and from the storage cells, CAP, and tape drives.
S
"#' #! "&#
A switch that
disconnects power to the library when the front
door is opened.
Small Computer System Interface.
%
A host adapter or control unit
attached to the SCSI bus.
# $!# $
The library menu
offering library and drive configuration selections.
"
A SCSI bus configuration
offering a maximum cable length of 6 meters (25
feet).
"#!#$ !$#
An initialization and diagnostic
routine performed automatically by the library
when it is powered on or reset.
"##$" " '
A page showing library and
drive status on the operator panel display.
"#! "
The slots where cartridge tapes are
kept in the library.
T
## #!
The motor driving the belt that
moves the library robot in horizontal rotation.
V
Volts or voltage.
Volts alternate current (AC).
Volts direct current (DC).
Volume serial number.
%$ "! $!
The code used by the
library to track cartridge tapes during library audits
and normal operation.
W
&!#
A setting on tape cartridges
allowing data to be written.
&!# !##
A setting on tape cartridges
preventing data from being written. Reading data
is still possible.
Z
$
The part of the library robot
responsible for vertical motion of the hand/camera
assembly.