HP Surestore Tape Library Model 3/30, Hardware Operator'S Manual

Page: 24 / 62

Operator Panel Controls
Hardware Operator’s Guide
2–2
DLT Library
Operator Panel Controls
The operator panel has five function buttons.
MENU The MENU button toggles the display between the Main Menu
and Library/Drive Status. The
MENU
button calls up the
previous (higher) level menu if the library displays one of the
nested menus.
ENTER
The
ENTER
button has two functions:
— It selects the option indicated by the menu cursor (>).
— It opens the cartridge access port (CAP) when that is
enabled.
Y B
The Up (
Y
) and Down (
B
) arrow buttons control the menu
cursor for scrolling between options.
SYSTEM RESET
A recessed
SYSTEM RESET
button allows the operator to
reset the library (terminate operation and reinitialize the
library) without affecting tape drive operation or erasing the
current library configuration.
Operator Panel LEDs
The operator panel has three LEDs:
Library Active The green Library Active LED is on during initialization,
then flashes when the processor card is active.
CAP Open The amber CAP Open LED is on when the CAP door is
unlocked and ready for access.
Service Required The red Service Required LED indicates operator
intervention is required before the library can be used
further. Check the Status Display on the operator panel for
an indication of the problem.