HP Surestore 6164 - Switch, Reference Manual

Page: 151 / 362

Fibre Alliance MIB Object Types 151
the read interval is too long, there can be events that cannot be contained in
the agent’s internal event buffer.
For example, an agent can read events 50 through 75.
At the next read interval, connUnitEventCurrID is 189. If the management
app tries to read event index 76, and the agent’s internal buffer is 100
entries max, event index 76 is no longer available.
The index value is an incrementing integer starting from 1 every time there
is a table reset. On table reset, all contents are emptied and all indices are
set to zero 0. When an event is added to the table, the event is assigned the
next higher integer value than the last item entered into the table. If the
index value reaches its maximum value, the next item entered causes the
index value to roll over and start at one 1 again.
Note
Mapped to swEventIndex.
connUnitEventId [connUnitEventTable]
Syntax
Integer
Access
Read-only
Status
Deprecated
Description The internal event ID. Incremented for each event, ranging between 0 and
connUnitMaxEvents. Not used as table index to simplify the agent
implementation. When this reaches the end of the range specified by
connUnitMaxEvents, the ID rolls over to start at 0. This value is set back to
0 at reset. The relationship of this value to the index is that the internal
event ID can represent a smaller number than a 32-bit integer (for example,
max 100 entries), and has a value range up to connUnitMaxEvents.
Note
Same as connUnitEventIndex.