manualshive.com logo in svg

HP Surestore 6164 - Switch, Reference Manual, Page: 54 / 362

Share
Download
HP Surestore 6164 - Switch Reference Manual Download Page 54

54

MIB Reference Manual

Access

Read-only

Status

Mandatory

Description

The routing mechanism by which this route has been learned. 

Note

Inclusion of values for gateway routing protocols is not intended to 

imply that hosts should support those protocols.

ipRouteAge

Syntax

Integer

Access

Read-write

Status

Mandatory

Description

The number of seconds since this route was last updated or otherwise 
determined to be correct.

Note

Older semantics cannot be implied except through knowledge of the 

routing protocol by which the route has been learned.

ipRouteMask

Syntax

IpAddress

Access

Read-write

Status

Mandatory

Description

The mask to be logical-ANDed with the destination address before being 
compared to the value in the ipRouteDest field. For those systems that do 
not support arbitrary subnet masks, an agent constructs the value of the 
ipRouteMask by determining whether the value of the correspondent 

Summary of Contents for Surestore 6164 - Switch











































































































































































































































































































































































Reviews:

No comments