manualshive.com logo in svg

HP Surestore 6164 - Switch, Reference Manual, Page: 352 / 362

Share
Download
HP Surestore 6164 - Switch Reference Manual Download Page 352

352

MIB Reference Manual

CT_IU

Common Transport Information Unit. An information unit that conforms to 
the Fibre Channel Common Transport (FC_CT) protocol.

Current fill word

The fill word currently selected by the LPSM (loop port state machine). See 
also Fill word.

Cut-through

Switching technique that allows selection of a transmission route for a frame 
as soon as destination address is received. See also Route.

Data word

Type of transmission word that occurs within frames. The frame header, data 
field, and CRC consist of data words. See also Frame, Ordered set, 
Transmission word.

Defined 
configuration

The complete set of all zone objects defined in the fabric; can include multiple 
zone configurations. See also Enabled configuration, Zone configuration.

Disparity

The relationship of ones and zeros in an encoded character. Neutral disparity 
indicates an equal number of each, positive disparity a majority of ones, and 
negative disparity a majority of zeros.

Distributed Fabrics

The combined user’s guides for Extended Fabrics and Remote Switch. Not 
a software product.

DLS

Dynamic Load Sharing. Dynamic distribution of traffic over available paths. 
Allows for redistribution when an Fx_Port or E_Port comes up or down.

Domain ID

A unique number between 1 and 239 that identifies the switch to the fabric.

E_D_TOV

Error Detect Timeout Value. Time allowed for round-trip transmission before 
recovery is initiated. Can also be defined as the minimum time an L_Port 
waits for sequence completion before initiating recovery. See also 
R_A_TOV.

E_Port

Expansion Port. A switch port that has the ability to connect to a similar port 
on another switch, allowing creation of an interswitch link. See also ISL.

EE_Credit

End-to-end credit. The number of receive buffers allocated by recipient port 
to originating port. Used by Class 1 and 2 services to manage exchange of 
frames across intervening ports in fabric. See also End-to-end flow control, 
BB_Credit.

Enabled 
configuration

The currently enabled zone configuration. Only one configuration can be 
enabled at a time. See also Defined configuration, Zone configuration.

Summary of Contents for Surestore 6164 - Switch











































































































































































































































































































































































Reviews:

No comments