manualshive.com logo in svg

HP Stream 11 Pro, Maintenance And Service Manual

Share
Download
HP Stream 11 Pro Maintenance And Service Manual Download Page 42

Power connector cable

Description

Spare part number

Power connector cable

787922-001

Before removing the power connector cable, follow these steps:

1.

Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the 
computer on, and then shut it down through the operating system.

2.

Disconnect the power from the computer by unplugging the power cord from the computer.

3.

Disconnect all external devices from the computer.

4.

Remove the keyboard/top cover (see 

Keyboard/top cover on page 22

).

Remove the power connector cable:

1.

Disconnect the power connector cable (1) from the system board.

2.

Release the power connector cable from the retention clips (2) and routing channel built into the 
base enclosure.

3.

Release the power connector from the retention molding (3) built into the base enclosure.

4.

Remove the power connector cable.

Reverse this procedure to install the power connector cable.

34

Chapter 5   Removal and replacement procedures

Summary of Contents for Stream 11 Pro








































































Reviews:

No comments

Brands by name

Popular brands

Load more brands