HP StorageWorks XP48 - Disk Array Owner'S Manual Download Page 73 | Manualshive

Page: 73 / 124

background image

The HP SureStore E Disk Array XP Family of Optional Software

73

Performance Monitoring

Monitor the performance of your disk array with Performance Manager XP
and Performance Advisor XP.

HP SureStore E Performance Manager XP

Performance Manager XP provides performance monitoring for your disk
array and allows you to adjust disk array performance. The Performance
Manager enables you or your service consultant to examine your system’s
workload and to perform reallocation of cache read and write ratios
according to user needs.

Performance Manager monitors your hardware performance, cache
statistics, and I/O statistics of your attached disk arrays. You can display
real-time and historical data as graphs using the Performance Manager.

HP SureStore E Performance Advisor XP

HP SureStore E Performance Advisor XP is an Internet application used to
collect and monitor real-time performance of the HP SureStore E XP
family of disk array products. Using a simple, browser-based interface, you
can quickly customize performance data collection and set performance
alarms. Performance Advisor provides real-time and historical data on:

• LDEV I/O

• front-end and back-end port utilization

• internal bus utilization

• cache usage

You can easily integrate with the VantagePoint DSI log and user PerfView
to view your performance metrics.

«
...
71
72
73
74
75
...
»

Summary of Contents for StorageWorks XP48 - Disk Array





























































































































Reviews:

No comments

Related manuals for StorageWorks XP48 - Disk Array

Brand: Jensen Audio Pages: 20

Brand: Jensen Pages: 20

Brand: Blaupunkt Pages: 8

Brand: Sharp Pages: 36

Brand: Aiwa Pages: 32

Brand: Aiwa Pages: 40

Brand: Aiwa Pages: 43

AMP NETCONNECT A-BUS Multi-Room Audio System

Brand: TE Connectivity Pages: 3

Integra RESEARCH RDC-7UPG2

Brand: Onkyo Pages: 9

Brand: easyRAID Pages: 73

Brand: easyRAID Pages: 32

Brand: Oreck Pages: 2

BeoSound Ouverture 2631

Brand: Bang-Olufsen Pages: 126

Brand: QSC Pages: 6

Brand: QSound Pages: 2

Brand: Auvi Pages: 21

Brand: LOTRONIC Pages: 105

CourtSmart ListenIR

Brand: Listen Technologies Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands