HP StorageWorks XP48 - Disk Array Owner'S Manual Download Page 68 | Manualshive

Page: 68 / 124

background image

68

HP SureStore E Disk Array XP512/XP48: Owner’s Guide

Core Solutions

There are three applications that provide core solutions: Cache LUN, LUN
Configuration Manager, and Remote Control.

HP SureStore E Cache LUN XP

Using Cache LUN for storage in cache increases access time to data.

HP SureStore E LUN Configuration Manager XP

The LUN Configuration Manager allows you to create, define, and
configure LUNs on your disk array. LUN Configuration Manager comes
with three applications that are executed on the SureStore E Command
View console or your remote control PC.

LUN Configuration Manager enables

• LUN creation and port assignment

• consolidation of LUNs (up to 36 LUNs can be combined)

• creation of small-size LUNs to accommodate data locked into cache

HP SureStore E Remote Control XP

Included with HP SureStore E Command View XP is Remote Control,
which provides customers with an alternative interface to accessing
SureStore E disk array resources. See figure 11 (page 69). Remote Control
is installed on a PC, provided by the customer, running Microsoft
Windows 95/98 or NT 4.0. Remote Control XP can manage up to eight
disk arrays.

«
...
66
67
68
69
70
...
»

Summary of Contents for StorageWorks XP48 - Disk Array





























































































































Reviews:

No comments

Related manuals for StorageWorks XP48 - Disk Array

Brand: JVC Pages: 2

Brand: JVC Pages: 16

Brand: JVC Pages: 2

Brand: JVC Pages: 2

Brand: JVC Pages: 31

Brand: JVC Pages: 24

Brand: JVC Pages: 48

Brand: JVC Pages: 70

Brand: JVC Pages: 2

MXDVA5 - 3 DVD/CD Home Theater Mini System

Brand: JVC Pages: 85

Brand: JVC Pages: 100

Brand: JVC Pages: 24

Brand: JVC Pages: 44

Brand: JVC Pages: 40

Brand: JVC Pages: 2

Brand: Advanced Native Technologies Pages: 29

Brand: Mitsubishi Electric Pages: 50

Brand: Sanyo Pages: 10

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands