HP StorageWorks XP48 - Disk Array Owner'S Manual Download Page 15

Page: 15 / 124

About the HP SureStore E Disk Array XP512 and XP48

• Full software and solution integration

local and remote mirroring for online backup and disaster recovery
(HP SureStore E Business Copy XP and Continuous Access XP)

security for multiple-serve consolidation (HP SureStore E Secure
Manager XP)

zero downtime backup (HP OmniBack, Exchange, Oracle, or SAP)

centralized resource management (HP SureStore E SAN Manager
LM/DM, Performance Manager XP, Performance Advisor XP, and
Auto LUN XP)

easy to use interface to access your disk array resources (HP SureStore
E Remote Control XP)

• I/O path failover and load balancing (HP SureStore E AutoPath XP)

To obtain updates to the software, go to the following websites:

www.hp.com/support/xp512

www.hp.com/support/xp48

Summary of Contents for StorageWorks XP48 - Disk Array





























































































































Search results

Summary of Contents for StorageWorks XP48 - Disk Array

Reviews:

Related manuals for StorageWorks XP48 - Disk Array

Brands by name

Popular brands

HP StorageWorks XP48 - Disk Array, Owner'S Manual

Search results

Summary of Contents for StorageWorks XP48 - Disk Array

Reviews:

Related manuals for StorageWorks XP48 - Disk Array

Brands by name

Popular brands