HP StorageWorks X9320 Administrator'S Manual Download Page 72

Page: 72 / 152

When the following screen appears, enter

to install the X9000 software on the file serving

node.

The server reboots automatically after the software is installed. Remove the DVD from the
DVD-ROM drive.

Restoring the node configuration

Complete the following steps on each node, starting with the previous active management console:

Attach the external storage media containing the saved node configuration information.

Restore the configuration. Run the following restore script and pass in the

tgz

file containing

the node's saved configuration information as an argument:

/usr/local/ibrix/setup/restore <saved_config.tgz>

Reboot the node.

Completing the upgrade

Complete the following steps:

Remount all X9000 Software file systems:

<ibrixhome>/bin/ibrix_mount -f <fsname> -m </mountpoint>

Remount all previously mounted X9000 Software file systems on Windows X9000 clients using
the Windows client GUI.

If automated failover was enabled before the upgrade, turn it back on from the node hosting
the active management console:

<ibrixhome>/bin/ibrix_server -m

Upgrading the X9000 Software

Summary of Contents for StorageWorks X9320

























































































































































Search results

Summary of Contents for StorageWorks X9320

Reviews:

Related manuals for StorageWorks X9320

Brands by name

Popular brands

HP StorageWorks X9320, Administrator'S Manual

Search results

Summary of Contents for StorageWorks X9320

Reviews:

Related manuals for StorageWorks X9320

Brands by name

Popular brands