HP StorageWorks X9320 Administrator'S Manual Download

Page: 11 / 152

To ensure continuous data access, X9000 Software provides manual and automated failover
protection at various points:

•

Server.

A failed node is powered down and a designated standby server assumes all of its

segment management duties.

•

Segment.

Ownership of each segment on a failed node is transferred to a designated standby

server.

•

Network interface.

The IP address of a failed network interface is transferred to a standby

network interface until the original network interface is operational again.

•

Storage connection.

For servers with HBA-protected Fibre Channel access, failure of the HBA

triggers failover of the node to a designated standby server.

High availability and redundancy

Summary of Contents for StorageWorks X9320

























































































































































Search results

Summary of Contents for StorageWorks X9320

Reviews:

Related manuals for StorageWorks X9320

Brands by name

Popular brands

HP StorageWorks X9320, Administrator'S Manual

Search results

Summary of Contents for StorageWorks X9320

Reviews:

Related manuals for StorageWorks X9320

Brands by name

Popular brands