1 Unpacking the library
This chapter contains the following sections:
• the section called “Selecting an installation location”
• the section called “Preparing for the installation”
• the section called “Unpacking the library”
• the section called “Setting up the library”
• the section called “Storing the packaging materials”
CAUTION:
Only quali
fi
ed HP
fi
eld service engineers should unpack the HP StorageWorks
ESL E-Series tape library.
Selecting an installation location
When choosing an installation site for the HP StorageWorks ESL E-Series tape library,
consider the requirements described in:
• the section called “Floor space”
• the section called “Floor clearance”
• the section called “Floor strength and inclination”
• the section called “Power and grounding”
• the section called “Environmental conditions”
NOTE:
These requirements are also described in the
HP StorageWorks ESL E-Series Tape
Library users guide
.
HP StorageWorks ESL E-Series Tape Library unpacking and installation guide
13
Summary of Contents for StorageWorks ESL E Series
Page 8: ...8 ...
Page 72: ...72 Loading tape cartridges ...
