Command Reference
41
HP StorageWorks NAS 8000 Command Reference
getStorageVolumegroupVolumeList
Returns a list of the file volumes that exist in the specified volume group.
■
inParam[0] = Volume group name
■
outParam[0:N] = Volume name list
repairStorageVolume
Attempts repairs on a volume. Use this command if, for some reason, the NAS 8000 could not
mount the file volumes due to an error (for example, an array failure and recovery where the
file system logs get corrupted). In these cases, run this command for each file volume that did
not mount after a reboot attempt.
Volume Settings
A volume group is divided into one or more file volumes. File volumes are the basic unit of
logical storage for a file system on the HP NAS 8000. File volumes can be further subdivided
into individual directories. The following commands are used to create and manage file
volumes.
getStorageVolumeType
Returns the type of the specified volume group: file volume or snapshot.
■
InParam[0] = Volume name
■
outParam[0] = Volume Type
getStorageVolumeList
Returns a list of file volumes that exist on the storage arrays in the HP NAS 8000 solution.
■
outParam[0:N] = Volume name list
setStorageVolumeSize
Sets the size of the specified file volume.
■
inParam[0] = Volume name
■
inParam[1] = Size (MB)
deleteStorageVolume
Deletes the specified file volume. All data will be lost.
■
inParam[0] = Volume name
setStorageVolumeName
Renames an existing file volume.
■
inParam[0] = Existing Volume name
■
inParam[1] = New Volume name
getStorageVolumeExists
Identifies whether or not the specified file volume exists. Answers: Is there a volume with
name?
■
InParam[0] = Volume name
■
outParam[0] = T (true) or F (false)