Overview
16
HP StorageWorks NAS 8000 Command Reference
Using the Command Line Interface
To access the NAS 8000 command line interface, you must first log in to the NAS server using
a serial connection or telnet.
First, connect to the system.
To connect using a serial connection, use a terminal emulator with the following settings:
■
Bits per second: 9600
■
Data bits: 8
■
Parity: None
■
Stop bits: 1
■
Flow control: None
To connect using telnet, enter the following command on a remote computer:
■
telnet xxx.xxx.xxx.xxx
where
xxx.xxx.xxx.xxx
is the IP address of the HP NAS 8000 system.
To log in to the system:
■
Press enter until you see the system name and login prompt.
■
Log in as “admin”. No password is required until you set one using the command line
interface or the Command View NAS web interface.
hp nas8000
NAS OS v1.0.0
localhost login:admin