Removal and replacement procedures 37
13.
Push in to release the four locking mechanisms on the rails located on the side and bottom of the
drawer.
14.
Remove the hard drive drawer.
To replace the component:
1.
Slide the rails back into the chassis.
2.
Align the top right edge of the drawer with the flange at the top of the chassis and align the four
rails on the left side and bottom of the drawer bay.
CAUTION:
To avoid damage to the equipment, HP recommends using two people to perform
this step.
Summary of Contents for StorageWorks 600 - Modular Disk System
