Removal and replacement procedures 34
2.
Remove the component as indicated.
To replace the component, reverse the removal procedure.
Hard drive drawer
To remove the component:
1.
Power down the MDS600 ("
Power down
" on page
25
).
2.
Disconnect all cables.
3.
Remove all power supplies ("
Power supply
" on page
33
).
4.
Remove all fan modules ("
Fan
" on page
31
).
5.
Remove all hard drives ("
Hard drive
" on page
27
).
CAUTION:
To avoid data loss, be sure that the drives are labeled and returned to the same
bays they were removed from.
6.
Be sure the hard drive drawer is closed completely.
7.
Remove all I/O modules ("
Hot-plug I/O module
" on page
32
).
8.
Pull down the handle on the front of the drawer, but do not extend the drawer.
Summary of Contents for StorageWorks 600 - Modular Disk System
